Yazar "Koc, Varol" için listeleme
-
Double cantilever indirect tension testing for fracture of quasibrittle materials
Caner, Ferhun C.; Donmez, A. Abdullah; Sener, Siddik; Koc, Varol (Pergamon-Elsevier Science Ltd, 2019)The Double Cantilever Beam (DCB) Mode I fracture testing has been widely used in fracture testing of especially fiber reinforced polymer composites and adhesive joints. Application of classical DCB testing to plain concrete ... -
Dynamic assessment of partially damaged historic masonry bridges under blast-induced ground motion using multi-point shock spectrum method
Haciefendioglu, Kemal; Koc, Varol (Elsevier Science Inc, 2016)We studied the partial damage effects on historic masonry bridges exposed to blast induced ground motion. For this purpose, a historic masonry bridge in Turkey was selected to estimate its shock spectral behaviour. In order ... -
Examining the Behaviour of a Reinforced Concrete System Under Horizontal Loads and Determination of Preliminary Design Reinforcement Ratios
Koc, Varol; Emiroglu, Yusuf (Springer, 2017)Minimum reinforcement ratios provided in the standards remain at very low levels especially at large systems subject to the effects of earthquakes. Thus, arranging the reinforcement ratios intended for preliminary design ... -
Size Effect and Fracture Parameters For Concrete Under the Various Supported Conditions
Koc, Varol (Gazi Univ, Fac Engineering Architecture, 2009)Double cantilever beams elements of normal strength concrete are loaded in compressive parallel to cantilever axes. Loads are applied in two different supporting conditions and compared with each other. Specimen thickness ... -
Size Effect in Normal- and High-Strength Concrete with Different Notches under the Axial Load
Koc, Varol; Sener, Siddik (Asce-Amer Soc Civil Engineers, 2009)This study investigated the fracturing of concrete under triaxial compression. The experimental program involved size effect tests of compression fractures of cylindrical specimens with small notches, large notches, and ... -
A study about determination of preliminary design & minimum reinforcement ratios
Koc, Varol; Emiroglu, Yusuf (Techno-Press, 2016)In the standards, minimum reinforcement ratios are presented as the least reinforcement ratios that bearing elements should have in a way to include all systems and in general. However, naturally these general minimum ...
